Polycarbonate diffuser is a polycarbonate profile with high light transmitting and scattering ability, made especially for use in luminaires.
The use of diffusers made of polycarbonate in luminaires is due to the special characteristics of this material. It combines high indicators of transparency, strength and lightness. Polycarbonate protective glass, otherwise known as a LED screen, is used in outdoor LED lighting fixtures. In addition, the protective polycarbonate diffuser for the street lamp housing can be made of UV stabilized polycarbonate. Resistance to impact, to UV rays provides reliability, durability and beautiful appearance of the lamp for a long time. Vandal-proof luminaires for housing and communal services are often equipped with polycarbonate diffusers, since the high strength, durability and structural convenience of polycarbonate diffusers increases the consumer properties of the luminaire.
LED lighting of cars, transport lighting is often made using opal (matte) polycarbonate diffusers. The name "matte" they received due to the material of the surface, due to which light is given a light yellowish tinge. The diffusers are placed in a light line (tape) and securely fixed in the aluminum profile with the help of latches on the spring-loaded walls of the polycarbonate profile. Thus, the installation, dismantling, operation of the diffuser does not require the use of tools and special skills. The interiors of wagons and vehicles are the sphere in which the use of polycarbonate diffusers is most expedient.
Our equipment allows us to produce polycarbonate diffusers by extrusion with a length of samples up to 6 meters and a thickness of 0.5 to 5 millimeters. The final cost of polycarbonate diffuser production depends on the thickness, length, batch, diffuser parameters, polycarbonate grade, color saturation and is calculated individually in each case. You can order and buy polycarbonate from us or arrange a purchase directly through the manufacturer.
ADVANTAGES OF THE POLYCARBONATE DIFFUSER AS COMPARED WITH THE MIXTURES FROM OTHER MATERIALS
Significantly higher resistance (by 10-100 times) to the impact of polycarbonate diffusers in comparison with polymer diffusers from other materials, which greatly increases the longevity, reliability and degree of protection of the luminaire. Antivandal lamps with installed polycarbonate diffusers, can be in public places, in the housing and communal services, in transport lighting, in the underground, in tunnels and underground passages, on the street - wherever there is a possibility of deliberate or involuntary damage to the lamp.
Production of diffusers for UV-stabilized polycarbonate lamps for their resistance to solar wear, preventing the scatterer from degradation (reduction in strength, yellowing). The use of diffusers made of UV stabilized polycarbonate significantly extends the service life, ensures a long-lasting preservation of the neat appearance of the luminaire, and also makes it possible to use light devices with polycarbonate diffusers under the sunlight.
The class of fire safety of polycarbonate diffusers can be changed from combustible to non-flammable (due to the proportion of extinguishing impurities - fire retardants). Lighting devices with polycarbonate diffusers, if compared to objects with diffusers from other thermoplastic materials, as well as more than all types of transport and gas stations (gas stations).
The temperature range of use of diffusers from polycarbonate is from -50 to +120 deg. Celsius.
The listed advantages of diffusers from polycarbonate allow them to gain increasing popularity in the lighting market, due to the increasing demands for reliability and safety.